For orders over 400 linear feet, please call for best pricing. 1-866-928-9744
Ackland Frames Can Be Purchased 3 Different Ways:
1. Basic Bulk (Not available w/Snap-Cap) : – 7ft, 8ft, 9ft & 12ft Lengths : Like lumber, straight-cut ends. Lowest price per foot, but material needs to be cut and mitered by YOU.Recommended for jobs where exact dimensions are uncertain or may change. (Chop saw with blade for cutting aluminum REQUIRED.)
2. Frame Only - Custom Sizes : Already mitered, ranging from 2' to 52'. Cost/foot is a little higher than Basic Bulk, but you'll save time and labor costs, because you won't have to cut the frames. This method may also save you on shipping because weight and size of the package may be reduced.
3. Frames with Printed Vinyl Included : Get the frame and digitally printed vinyl all in one shot! Ready for installation.. Super Easy!
STEP 1
Decide which frame is right for the job.
STEP 2
Enter desired dimensions and quantities to get pricing.
STEP 3
Decide which is best between "FRAME ONLY" or "FRAMES w/PRINTED VINYL"
STEP 4
Place order
Frames Only
Frame WITH Printed Vinyls
Basic Bulk – 8ft & 12ft lengths
Snap-Cap Frame WITH Printed Vinyl
WHICH FRAME IS RIGHT FOR THE JOB?
Frame Width: |
3" |
Frame Profile Height: |
½" (off of substrate) |
Vinyl Size: |
SAME as Outer Dimension of Frame |
Important: |
Vinyl should have a RAW EDGE. No hems, grommets, or finishing of any kind. |
Artwork Layout: |
3" Bleed |
Viewable Opening: |
or "LIVE" area Equals Frame Size MINUS 6" Height & Width |
Example:
Frame Size | 8' x 10' |
Vinyl Size | 8' x 10' |
Viewable Opening | 7' 6" x 9' 6" |